Airworthiness Directives; Raytheon Aircraft Company Beech Models 45 (YT-34), A45 (T-34A, B-45), and D45 (T-34B) Airplanes

This document supersedes Airworthiness Directive (AD) 99-12- 02, which currently requires flight and operating limitations on Raytheon Aircraft Corporation (Raytheon) Beech Models 45 (YT-34), A45 (T-34A, B-45), and D45 (T-34B) airplanes. AD 99-12-02 resulted from a report of an in-flight separation of the right wing on a Raytheon Beech Model A45 (T-34A) airplane. The AD was issued as an interim action until the development of FAA-approved inspection procedures. Raytheon has developed procedures to inspect the wing spar assemblies of the above-referenced airplanes. This AD requires repetitive inspections of the wing spar assembly for cracks with replacement of any wing spar assembly found cracked (unless the spar assembly has a crack indication in the filler strip where the direction of the crack is toward the outside edge of the filler strip). This AD also includes a reporting requirement of the results of the initial inspection and maintains the flight and operating restrictions required by AD 99-12-02 until accomplishment of the initial inspection. The actions specified by this AD are intended to prevent wing spar failure caused by fatigue cracks in the wing spar assemblies and ensure the operational safety of the above-referenced airplanes.