# Airworthiness Directives; Bell Helicopter Textron Canada Model 206A, B, L, L1, and L3 Helicopters
> **Rule** · Final rule. · Published 2001-02-02 · Effective 2001-03-09 · 66 FR 8759
## Document
- **Document number:** 01-2427
- **Category:** airworthiness
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 66 FR 8759
- **Publication date:** 2001-02-02
- **Effective date:** 2001-03-09
- **FAA docket:** Docket No. 2000-SW-34-AD
## Abstract

This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron Canada (BHTC) Model 206A, B, L, L1, and L3 helicopters. This AD requires inspecting the collective lever assembly (assembly) for a raised forging boss, inspecting the assembly for adequate clearance between the collective lever and the swashplate outer ring (outer ring), and modifying any assembly with a raised forging boss and inadequate clearance before further flight. Modifying any assembly that has a raised forging boss and adequate clearance would be required before further flight after January 31, 2001. This AD is prompted by the discovery that a raised forging boss could result in control system interference. The actions specified by this AD are intended to prevent interference between the collective lever and the outer ring, damage to flight controls, and subsequent loss of control of the helicopter.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2001/02/02/01-2427/airworthiness-directives-bell-helicopter-textron-canada-model-206a-b-l-l1-and-l3-helicopters)
---
*AI Analytics · CC0 1.0*