# Airworthiness Directives; Eurocopter France Model SA-365N1, AS-365N2, and SA-366G1 Helicopters
> **Rule** · Final rule. · Published 2001-10-03 · 66 FR 50307
## Document
- **Document number:** 01-24624
- **Category:** airworthiness
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 66 FR 50307
- **Publication date:** 2001-10-03
- **FAA docket:** Docket No. 99-SW-34-AD
## Abstract

This amendment revises an existing airworthiness directive (AD) for Eurocopter France (ECF) Model SA-365N1, AS-365N2, and SA-366G1 helicopters. That AD currently requires inspecting each tail rotor blade for bonding separation, measuring the clearance between the tip of each tail rotor blade and the circumference of the air duct, and replacing the blade if necessary. This amendment requires the same actions but allows the pilot to perform the daily visual check and contains a damage allowance for certain blades. This amendment is prompted by FAA determination that the pilot can check for a cracked, blistered, or wrinkled blade and that some debonding of the blade is acceptable. The actions specified by this AD are intended to allow a pilot check, to prevent unacceptable damage to a tail rotor blade, and to prevent loss of tail rotor control and subsequent loss of control of the helicopter.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2001/10/03/01-24624/airworthiness-directives-eurocopter-france-model-sa-365n1-as-365n2-and-sa-366g1-helicopters)
---
*AI Analytics · CC0 1.0*