# Airworthiness Directives; Sikorsky Model S-70A and S-70C Helicopters
> **Rule** · Final rule; request for comments. · Published 2001-12-18 · Effective 2002-01-02 · 66 FR 65102
## Document
- **Document number:** 01-31041
- **Category:** airworthiness
- **Manufacturer:** Sikorsky Model S-70A and S-70C
- **Type:** Rule
- **Action:** Final rule; request for comments.
- **Citation:** 66 FR 65102
- **Publication date:** 2001-12-18
- **Effective date:** 2002-01-02
- **FAA docket:** Docket No. 2001-SW-18-AD
## Abstract

This amendment adopts a new airworthiness directive (AD) for Sikorsky Model S-70A and S-70C helicopters. This action requires certain inspections of each main landing gear drag beam (beam) for a crack and removing any cracked beam before further flight. This action also requires reducing the torque of the jackpad mounting bolt retention nut (nut) of each beam. This amendment is prompted by failure of a beam due to stress corrosion resulting from sustained tensile stress due partly to excessive torque of the nut. The actions specified in this AD are intended to prevent excessive torque of the nut, failure of a beam, and subsequent loss of control of the helicopter during takeoff or landing.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2001/12/18/01-31041/airworthiness-directives-sikorsky-model-s-70a-and-s-70c-helicopters)
---
*AI Analytics · CC0 1.0*