# Airworthiness Directives; Eurocopter France Model SA330F, G, and J; AS332C, L, and L1; SA341G; SA342J; AS350B, BA, B1, B2, B3, and D; AS355E, F, F1, F2 and N; SA-365C, C1, and C2; SA-365N and N1; and AS-365N2 and N3 Helicopters
> **Rule** · Final rule. · Published 2003-07-21 · Effective 2003-08-25 · 68 FR 42957
## Document
- **Document number:** 03-17948
- **Category:** airworthiness
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 68 FR 42957
- **Publication date:** 2003-07-21
- **Effective date:** 2003-08-25
- **FAA docket:** Docket No. 2002-SW-56-AD
## Abstract

This amendment adopts a new airworthiness directive (AD) for the specified Eurocopter France (ECF) model helicopters that requires determining whether specified main or tail rotor (rotor) parts are installed and, if so, updating and recording the correct hours time-in- service (TIS) or cycles of each part. If the hours TIS or cycles of any rotor part exceed its life limit, this AD also requires replacing that part with an airworthy part within 50 hours TIS. This amendment is prompted by the need to correct the Equipment Log Card (FME) to accurately reflect the total hours TIS and cycles of certain repaired or overhauled rotor parts. The actions specified by this AD are intended to prevent failure of a life limited rotor part, loss of a rotor, and subsequent loss of control of the helicopter.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2003/07/21/03-17948/airworthiness-directives-eurocopter-france-model-sa330f-g-and-j-as332c-l-and-l1-sa341g-sa342j-as350b)
---
*AI Analytics · CC0 1.0*