# Airworthiness Directives; Tiger Aircraft LLC Models AA-5, AA-5A, AA-5B, and AG-5B Airplanes
> **Rule** · Final rule. · Published 2005-08-22 · Effective 2005-10-03 · 70 FR 48857
## Document
- **Document number:** 05-16260
- **Category:** airworthiness
- **Manufacturer:** Tiger
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 70 FR 48857
- **Publication date:** 2005-08-22
- **Effective date:** 2005-10-03
- **FAA docket:** Docket No. FAA-2005-20968
## Abstract

The FAA is revising Airworthiness Directive (AD) 95-19-15 for all Tiger Aircraft LLC (Type Certificate A16EA formerly held by American General Aircraft Corporation and Grumman American Aviation Corporation) Models AA-5, AA-5A, AA-5B, and AG-5B airplanes. AD 95-19- 15 currently requires you to inspect the wing attach shoulder bolts for fretting, scoring, wear, or enlarged or elongated mounting holes (known as damage from hereon); replace any damaged parts; repair any damaged areas; inspect the wing spar at the center spar clearance gap for excessive clearance; and shim the spar if excessive clearance is found. That AD was written to apply to all serial numbers of all models. A design change was made in this area beginning with serial number 10175 of the Model AG-5B airplanes. Therefore, the action should not apply to Model AG-5B airplanes with a serial number of 10175 or higher. This AD retains all the actions of AD 95-19-15 for all airplanes originally affected, but cuts off the applicability for the Model AG-5B airplanes at serial number 10174. We are issuing this AD to continue to prevent wing attach shoulder bolt failure, which, if not detected and corrected, could lead to structural damage of the wing/fuselage to the point of failure.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2005/08/22/05-16260/airworthiness-directives-tiger-aircraft-llc-models-aa-5-aa-5a-aa-5b-and-ag-5b-airplanes)
---
*AI Analytics · CC0 1.0*