# Airworthiness Directives; Boeing Model 767-200, -300, and -300F Series Airplanes Powered by General Electric or Pratt & Whitney Engines
> **Rule** · Final rule. · Published 2005-09-22 · Effective 2005-10-27 · 70 FR 55519
## Document
- **Document number:** 05-18785
- **Category:** airworthiness
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 70 FR 55519
- **Publication date:** 2005-09-22
- **Effective date:** 2005-10-27
- **FAA docket:** Docket No. FAA-2005-21355
## Abstract

The FAA is superseding an existing airworthiness directive (AD), which applies to certain Boeing Model 767 series airplanes. That AD currently requires repetitive inspections to detect discrepancies of the eight aft-most fastener holes in the horizontal tangs of the midspar fitting of the strut, and corrective actions if necessary. That AD also provides an optional terminating action for the repetitive inspections. This new AD adds repetitive inspections for cracks of the closeout angle that covers the two aft-most fasteners in the lower tang of the midspar fitting, and related investigative and corrective actions if necessary. This AD also reduces the inspection interval of the upper tang of the outboard midspar fitting; and provides an optional terminating action for the repetitive inspections. This AD results from a report of a crack in a closeout angle that covers the two aft-most fasteners in the lower tang of the midspar fitting; and the discovery of a crack in the lower tang of the midspar fitting under the cracked closeout angle. We are issuing this AD to prevent fatigue cracking in the primary strut structure and reduced structural integrity of the strut, which could result in separation of the strut and engine.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2005/09/22/05-18785/airworthiness-directives-boeing-model-767-200--300-and--300f-series-airplanes-powered-by-general)
---
*AI Analytics · CC0 1.0*