# Airworthiness Directives; Boeing Model 757-200, -200PF, and -200CB Series Airplanes
> **Rule** · Final rule. · Published 2005-01-10 · Effective 2005-02-14 · 70 FR 1655
## Document
- **Document number:** 05-281
- **Category:** airworthiness
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 70 FR 1655
- **Publication date:** 2005-01-10
- **Effective date:** 2005-02-14
- **FAA docket:** Docket No. 2003-NM-166-AD
## Abstract

This amendment adopts a new airworthiness directive (AD), applicable to certain Boeing Model 757-200, -200PF, and -200CB series airplanes, that requires an inspection of certain ballscrews of the trailing edge flap system to find their part numbers, and replacement of the ballscrews with new, serviceable, or modified ballscrews if necessary. This action is necessary to prevent a flap skew due to insufficient secondary load path of the ballscrew of the trailing edge flaps in the event that the primary load path fails, which could result in possible loss of a flap and reduced controllability of the airplane. This action is intended to address the identified unsafe condition.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2005/01/10/05-281/airworthiness-directives-boeing-model-757-200--200pf-and--200cb-series-airplanes)
---
*AI Analytics · CC0 1.0*