# Airworthiness Directives; General Electric Company CF6-45A, CF6-50A, CF6-50C, and CF6-50E Series Turbofan Engines
> **Rule** · Final rule. · Published 2005-03-30 · Effective 2005-05-04 · 70 FR 16096
## Document
- **Document number:** 05-6107
- **Category:** airworthiness
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 70 FR 16096
- **Publication date:** 2005-03-30
- **Effective date:** 2005-05-04
- **FAA docket:** Docket No. FAA-2004-19463
## Abstract

The FAA is adopting a new airworthiness directive (AD) for General Electric Company (GE) CF6-45A, CF6-50A, CF6-50C, and CF6-50E series turbofan engines that have not incorporated GE Service Bulletin (SB) No. CF6-50 S/B 72-1239, Revision 1, dated September 24, 2003, or that have not incorporated paragraph 3.B. of GE SB No. CF6-50 S/B 72- 1239, original issue, dated May 29, 2003. This AD requires inspecting the stage 1 low pressure turbine (LPT) blades for damage and replacement of the LPT module if necessary. This AD results from a report of a stud that separated from a turbine mid frame (TMF) strut and from an updated analysis of strut stud failures. We are issuing this AD to prevent uncontained failure of the engine and possible damage to the airplane caused by failure of TMF strut studs.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2005/03/30/05-6107/airworthiness-directives-general-electric-company-cf6-45a-cf6-50a-cf6-50c-and-cf6-50e-series)
---
*AI Analytics · CC0 1.0*