# Airworthiness Directives; Raytheon Aircraft Company Beech Models 45 (YT-34), A45 (T-34A, B-45), and D45 (T-34B) Airplanes
> **Rule** · Final rule. · Published 2007-03-12 · Effective 2007-04-16 · 72 FR 10909
## Document
- **Document number:** 07-1106
- **Category:** airworthiness
- **Manufacturer:** Raytheon
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 72 FR 10909
- **Publication date:** 2007-03-12
- **Effective date:** 2007-04-16
- **FAA docket:** Docket No. FAA-2006-25105
## Abstract

We are adopting a new airworthiness directive (AD) that supersedes AD 62-24-01, which applies to all Raytheon Aircraft Company (RAC) Beech Models 45 (YT-34), A45 (T-34A, B45), and D45 (T-34B) airplanes. AD 62-24-01 currently requires you to repetitively inspect, using the dye penetrant method, the front and rear horizontal stabilizer spars for cracks and replace any cracked stabilizer. Since we issued AD 62-24-01, we determined that using the dye penetrant inspection method may not detect cracks before the crack grows to a critical length and causes failure of the horizontal stabilizer spars. Therefore, we are requiring the surface eddy current inspection method to detect cracks in the horizontal stabilizer spars. Consequently, this AD retains the actions required in AD 62-24-01 and changes the required inspection method from dye penetrant to surface eddy current. We are issuing this AD to prevent failure of the front and/or rear horizontal stabilizer spars caused by fatigue cracks. This failure could result in stabilizer separation and loss of control of the airplane.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2007/03/12/07-1106/airworthiness-directives-raytheon-aircraft-company-beech-models-45-yt-34-a45-t-34a-b-45-and-d45)
---
*AI Analytics · CC0 1.0*