# Airworthiness Directives; Agusta S.p.A. Model A109A, A109A II, A109C, and A109K2 Helicopters
> **Rule** · Final rule; request for comments. · Published 2011-08-26 · Effective 2011-09-12 · 76 FR 53324
## Document
- **Document number:** 2011-21476
- **Category:** airworthiness
- **Type:** Rule
- **Action:** Final rule; request for comments.
- **Citation:** 76 FR 53324
- **Publication date:** 2011-08-26
- **Effective date:** 2011-09-12
- **FAA docket:** Docket No. FAA-2011-0823
## Abstract

This amendment supersedes an existing emergency airworthiness directive (EAD) for the specified Agusta S.p.A. (Agusta) model helicopters. That EAD currently requires inspecting the main rotor scissor fitting assembly to determine if there are 2 washers installed under the head of each main rotor scissor fitting assembly fixing bolt (fixing bolt). If there are not 2 washers installed under the head of each fixing bolt, that EAD requires replacing each fixing bolt and installing 2 washers under the head of each fixing bolt. This superseding airworthiness directive (AD) is prompted by the determination that a wrong part number (P/N) for the main rotor scissor fitting assembly was listed in the EAD. This AD retains the requirements of the EAD and corrects a P/N for the main rotor scissor fitting assembly. The actions specified by this AD are intended to prevent a crack in a fixing bolt, failure of a fixing bolt, and subsequent loss of control of the helicopter.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2011/08/26/2011-21476/airworthiness-directives-agusta-spa-model-a109a-a109a-ii-a109c-and-a109k2-helicopters)
---
*AI Analytics · CC0 1.0*