# Airworthiness Directives; Turbomeca Model Arriel 1E2, 1S, and 1S1 Turboshaft Engines
> **Rule** · Final rule; request for comments. · Published 2011-03-04 · Effective 2011-03-09 · 76 FR 11940
## Document
- **Document number:** 2011-4832
- **Category:** airworthiness
- **Type:** Rule
- **Action:** Final rule; request for comments.
- **Citation:** 76 FR 11940
- **Publication date:** 2011-03-04
- **Effective date:** 2011-03-09
- **FAA docket:** Docket No. FAA-2011-0141
## Abstract

This action supersedes emergency airworthiness directive (AD) 2011-05-51 that was sent previously to all known U.S. owners and operators of the products listed above. That AD requires inspecting the fuel ejector in the body of the fuel ejector assembly for proper installation by checking that the circlip is properly seated in its groove. That AD was prompted by three reports of incorrectly assembled low-pressure fuel system ejectors; with one of them resulting in an uncommanded engine in-flight shutdown. This AD requires the same actions and compliance times as the emergency AD, after receipt of the emergency AD, and expands the AD applicability by including helicopters having one or two affected engines and experiencing no starting difficulties. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2011/03/04/2011-4832/airworthiness-directives-turbomeca-model-arriel-1e2-1s-and-1s1-turboshaft-engines)
---
*AI Analytics · CC0 1.0*