# Airworthiness Directives; The Boeing Company Airplanes
> **Rule** · Final rule. · Published 2016-10-07 · Effective 2016-11-14 · 81 FR 69666
## Document
- **Document number:** 2016-22707
- **Category:** airworthiness
- **Manufacturer:** The Boeing Company
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 81 FR 69666
- **Publication date:** 2016-10-07
- **Effective date:** 2016-11-14
- **FAA docket:** Docket No. FAA-2016-3986
## Abstract

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-400, 747-400D, and 747-400F series airplanes. This AD was prompted by a determination that a certain fastener type in the fuel tank walls has insufficient bond to the structure, and an electrical wiring short could cause arcing to occur at the ends of fasteners in the fuel tanks. This AD requires the installation of new clamps and polytetrafluoroethylene (TFE) sleeves on the wire bundles of the front spars and rear spars of the wings. This AD also requires inspecting the existing TFE sleeves under the wire bundle clamps for correct installation, and replacement if necessary. We are issuing this AD to prevent potential ignition sources in the fuel tank in the event of a lightning strike or high-powered short circuit, and consequent fire or explosion.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2016/10/07/2016-22707/airworthiness-directives-the-boeing-company-airplanes)
---
*AI Analytics · CC0 1.0*