# Airworthiness Directives; The Boeing Company Airplanes
> **Rule** · Final rule. · Published 2020-07-23 · Effective 2020-08-27 · 85 FR 44456
## Document
- **Document number:** 2020-15818
- **Category:** airworthiness
- **Manufacturer:** The Boeing Company
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 85 FR 44456
- **Publication date:** 2020-07-23
- **Effective date:** 2020-08-27
- **FAA docket:** Docket No. FAA-2020-0097
## Abstract

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-300, -400, and -500 series airplanes. This AD was prompted by a report that a crack indication consistent with fatigue cracking was found on the left nacelle support overwing fitting flange fastener hole during teardown of a Model 737-300 series airplane. This AD requires a general visual inspection of the strut to wing diagonal brace at a certain location for cracking. For certain airplanes, this AD also requires an ultrasonic inspection of the nacelle support overwing fitting at certain fastener locations for cracking. For certain other airplanes, this AD requires a magnetic check of the nacelle support overwing fitting at a certain location to determine the material composition. This AD requires applicable on- condition actions. The FAA is issuing this AD to address the unsafe condition on these products.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2020/07/23/2020-15818/airworthiness-directives-the-boeing-company-airplanes)
---
*AI Analytics · CC0 1.0*