# Airworthiness Directives; The Boeing Company Airplanes
> **Rule** · Final rule. · Published 2020-12-10 · Effective 2021-01-14 · 85 FR 79411
## Document
- **Document number:** 2020-27005
- **Category:** airworthiness
- **Manufacturer:** The Boeing Company
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 85 FR 79411
- **Publication date:** 2020-12-10
- **Effective date:** 2021-01-14
- **FAA docket:** Docket No. FAA-2020-0586
## Abstract

The FAA is superseding Airworthiness Directive (AD) 2018-14- 02, which applied to certain The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. AD 2018-14-02 required an inspection for foam insulation on the dripshield above the overhead panel support structure and replacement if necessary. For certain airplanes, AD 2018- 14-02 also required replacement of foam insulation on the overhead panel support structure. This AD continues to require the actions in AD 2018-14-02, and, for certain airplanes, this AD requires an inspection of the foam insulation on the overhead panel support structure, and replacement if necessary. This AD was prompted by reports that additional areas of Boeing Material Specification (BMS) 8-39 flexible urethane foam were found on the overhead panel support structure in the flight compartment. The FAA is issuing this AD to address the unsafe condition on these products.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2020/12/10/2020-27005/airworthiness-directives-the-boeing-company-airplanes)
---
*AI Analytics · CC0 1.0*