Airworthiness Directives; GE Aviation Czech s.r.o. (Type Certificate Previously Held by WALTER Engines a.s., Walter a.s., and MOTORLET a.s.) Turboprop Engines
airworthiness · Rule · Final rule; request for comments. · Published 2021-06-15 · Effective 2021-06-30 · 86 FR 31601
Document
Document number
2021-12659
Federal Register citation
86 FR 31601
Type
Rule
Action
Final rule; request for comments.
Category
airworthiness
Manufacturer
GE Aviation Czech s.r.o. (Type Certificate Previously Held by WALTER
Publication date
2021-06-15
Effective date
2021-06-30
FAA docket
Docket No. FAA-2021-0499
Abstract
The FAA is adopting a new airworthiness directive (AD) for all GE Aviation Czech s.r.o. (GEAC) M601D-11, M601E-11, M601E-11A, M601E- 11AS, M601E-11S, and M601F model turboprop engines. This AD was prompted by the manufacturer finding errors in the Airworthiness Limitation Section (ALS) of the Engine Maintenance Manual (EMM), including errors in the formula to determine the equivalent flight cycles (FCs) of critical parts and errors with certain part numbers (P/ Ns). The manufacturer also determined that the life limit of a certain compressor case is not listed in the ALS section of the applicable EMM. This AD requires recalculating the life of critical parts and, depending on the results of the recalculation, replacement of these critical parts. This AD also requires replacement of a certain compressor case. The FAA is issuing this AD to address the unsafe condition on these products.