# Airworthiness Directives; The Boeing Company Airplanes
> **Rule** · Final rule; request for comments. · Published 2021-08-17 · Effective 2021-08-17 · 86 FR 45855
## Document
- **Document number:** 2021-17681
- **Category:** airworthiness
- **Manufacturer:** The Boeing Company
- **Type:** Rule
- **Action:** Final rule; request for comments.
- **Citation:** 86 FR 45855
- **Publication date:** 2021-08-17
- **Effective date:** 2021-08-17
- **FAA docket:** Docket No. FAA-2021-0670
## Abstract

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-800 and -900ER series airplanes. This AD was prompted by reports that several of the fittings that provide attachment between the radome and fuselage were cracked to the point of failure on airplanes modified in accordance with a certain supplemental type certificate (STC). This AD requires demodification of the STC installation on the airplane by removing the external equipment installed during the STC modification (including the radome, antenna, and associated structure), installing doubler and fasteners, and system deactivation by pulling and collaring associated circuit breakers if installed. This AD also requires inspecting the external and feed- through doublers, intercostals, skin, and frames in the area around the removed external equipment for cracking, and repair if necessary. The FAA is issuing this AD to address the unsafe condition on these products.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2021/08/17/2021-17681/airworthiness-directives-the-boeing-company-airplanes)
---
*AI Analytics · CC0 1.0*