# Airworthiness Directives; The Boeing Company Airplanes
> **Rule** · Final rule. · Published 2023-07-20 · Effective 2023-08-24 · 88 FR 46673
## Document
- **Document number:** 2023-15305
- **Category:** airworthiness
- **Manufacturer:** The Boeing Company
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 88 FR 46673
- **Publication date:** 2023-07-20
- **Effective date:** 2023-08-24
- **FAA docket:** Docket No. FAA-2022-0458
## Abstract

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 767 airplanes. This AD was prompted by reports of inoperative manual and alternate horizontal stabilizer trim switches. This AD requires repetitive inspections for immersion of each limit switch and position transmitter module (LSPTM) and of the LSPTM electrical wiring, repetitive inspections for blockage of the drain holes and cleaning of each drain hole, repetitive inspections for loose or cracked leveling compound, and applicable on-condition actions. For certain airplanes, this AD also requires installing two new drain holes, performing repetitive inspections for blockage of the drain holes and cleaning each drain hole, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2023/07/20/2023-15305/airworthiness-directives-the-boeing-company-airplanes)
---
*AI Analytics · CC0 1.0*