# Airworthiness Directives; Boeing Model 737-100 and -200 Series Airplanes
> **Rule** · Final rule. · Published 1997-08-12 · Effective 1997-09-16 · 62 FR 43067
## Document
- **Document number:** 97-20952
- **Category:** airworthiness
- **Manufacturer:** Boeing Model 737-100 and -200 Series
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 62 FR 43067
- **Publication date:** 1997-08-12
- **Effective date:** 1997-09-16
- **FAA docket:** Docket No. 96-NM-152-AD
## Abstract

This amendment adopts a new airworthiness directive (AD), applicable to all Boeing Model 737-100 and -200 series airplanes, that requires replacement of certain outboard and inboard wheel halves with improved wheel halves. This amendment also requires cleaning and inspecting certain outboard and inboard wheel halves for corrosion, missing paint in large areas, and cracks; and repair or replacement of the wheel halves with serviceable wheel halves, if necessary. This amendment is prompted by a review of the design of the flight control systems on Model 737 series airplanes. The actions specified by this AD are intended to prevent failure of the wheel flanges, which could result in damage to the hydraulics systems, jammed flight controls, loss of electrical power, or other combinations of failures; and consequent reduced controllability of the airplane.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/1997/08/12/97-20952/airworthiness-directives-boeing-model-737-100-and--200-series-airplanes)
---
*AI Analytics · CC0 1.0*