# Airworthiness Directives; Ayres Corporation S2R Series Airplanes
> **Rule** · Final rule; request for comments. · Published 1997-08-18 · Effective 1997-09-05 · 62 FR 43926
## Document
- **Document number:** 97-21788
- **Category:** airworthiness
- **Manufacturer:** Ayres Corporation S2R Series
- **Type:** Rule
- **Action:** Final rule; request for comments.
- **Citation:** 62 FR 43926
- **Publication date:** 1997-08-18
- **Effective date:** 1997-09-05
- **FAA docket:** Docket No. 97-CE-65-AD
## Abstract

This amendment supersedes Airworthiness Directive (AD) 97-13- 11, which currently requires inspecting the \1/4\-inch and \5/16\-inch bolt hole areas on the lower spar caps for fatigue cracking on Ayres S2R series airplanes, and replacing any lower spar cap if fatigue cracking is found. That AD resulted from an accident on an Ayres S2R series airplane where the wing separated from the airplane in flight. AD 97-13-11 incorrectly references the Ayres Model S2R-R1340 airplanes as Model S2R-1340R. This AD requires the same actions as AD 97-13-11, but corrects the designation of the Model S2R-R1340 airplanes. The actions specified by this AD are intended to detect fatigue cracking of the lower spar caps, which, if not corrected, could result in the wing separating from the airplane with consequent loss of control of the airplane.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/1997/08/18/97-21788/airworthiness-directives-ayres-corporation-s2r-series-airplanes)
---
*AI Analytics · CC0 1.0*