# Airworthiness Directives; Allison Engine Company Model 250-C40B Turboshaft Engines
> **Rule** · Final rule; request for comments. · Published 1997-12-08 · Effective 1997-12-23 · 62 FR 64517
## Document
- **Document number:** 97-31966
- **Category:** airworthiness
- **Manufacturer:** Allison
- **Type:** Rule
- **Action:** Final rule; request for comments.
- **Citation:** 62 FR 64517
- **Publication date:** 1997-12-08
- **Effective date:** 1997-12-23
- **FAA docket:** Docket No. 97-ANE-31-AD
## Abstract

This amendment adopts a new airworthiness directive (AD) that is applicable to Allison Engine Company Model 250-C40B turboshaft engines. This action requires installation of a placard requiring pilots to record torque level and time in service operating above 86% engine torque until the defective parts have been replaced, no later than December 31, 2000, or when certain maintenance actions are accomplished, or when certain operational restrictions are exceeded, whichever occurs earliest. This amendment is prompted by a report from Allison Engine Company of a manufacturing defect in certain helical power takeoff gearshaft assemblies, identified by serial numbers. The actions specified in this AD are intended to prevent fatigue failure of the helical power takeoff gearshaft assembly, which could result in a loss of engine power and inflight engine shutdown.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/1997/12/08/97-31966/airworthiness-directives-allison-engine-company-model-250-c40b-turboshaft-engines)
---
*AI Analytics · CC0 1.0*