# Airworthiness Directives; Pilatus Aircraft Ltd. Models PC-12 and PC-12/45 Airplanes
> **Rule** · Final rule; request for comments. · Published 1998-05-18 · Effective 1998-06-07 · 63 FR 27195
## Document
- **Document number:** 98-13060
- **Category:** airworthiness
- **Manufacturer:** Pilatus
- **Type:** Rule
- **Action:** Final rule; request for comments.
- **Citation:** 63 FR 27195
- **Publication date:** 1998-05-18
- **Effective date:** 1998-06-07
- **FAA docket:** Docket No. 98-CE-40-AD
## Abstract

This amendment supersedes Airworthiness Directive (AD) 97-23- 04, which currently requires replacing the fuel tank vent valves with modified fuel tank vent valves on certain Pilatus Aircraft Ltd. (Pilatus) Models PC-12 and PC-12/45 airplanes. This AD retains the fuel tank vent valves replacement required by AD 97-23-04, and requires drilling a 4.8 millimeter (0.1875 inch) hole in each fuel filler cap. This AD also requires inserting a temporary revision in the Pilot's Operating Handbook (POH) that specifies checking to assure that the fuel filler cap hole is clear of ice and foreign objects. This AD is the result of mandatory continued airworthiness information (MCAI) issued by the airworthiness authority for Switzerland. The actions specified by this AD are intended to prevent the fuel tank inward vent valve from freezing, which, if followed by a cold soak at altitude, could result in wing airfoil distortion and structural damage with consequent degradation of the airplane's handling qualities.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/1998/05/18/98-13060/airworthiness-directives-pilatus-aircraft-ltd-models-pc-12-and-pc-1245-airplanes)
---
*AI Analytics · CC0 1.0*