# Airworthiness Directives; International Aero Engines AG V2500-A1 and V2500-A5 Series Turbofan Engines
> **Rule** · Final rule; request for comments. · Published 1999-06-15 · Effective 1999-06-25 · 64 FR 31967
## Document
- **Document number:** 99-14933
- **Category:** airworthiness
- **Manufacturer:** International Aero
- **Type:** Rule
- **Action:** Final rule; request for comments.
- **Citation:** 64 FR 31967
- **Publication date:** 1999-06-15
- **Effective date:** 1999-06-25
- **FAA docket:** Docket No. 99-NE-37-AD
## Abstract

This amendment adopts a new airworthiness directive (AD) that is applicable to certain International Aero Engines AG (IAE) V2500-A1 and V2500-A5 series turbofan engines. This action requires determining the need for a special borescope inspection of the high pressure turbine (HPT) stage 1 inner rotating airseal (TOBI ID seal) for oil wetting after an in-flight shutdown (IFSD). It also requires, if necessary, the tear down and inspection of HPT hardware. This amendment is prompted by reports of overheat damage to the HPT hardware caused by ignition of oil that leaked into the HPT from the No. 4 bearing compartment during an IFSD. The actions specified in this AD are intended to prevent failure of the HPT hardware due to ignition of oil trapped by the HPT TOBI ID seal, which could result in an uncontained engine failure and damage to the airplane.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/1999/06/15/99-14933/airworthiness-directives-international-aero-engines-ag-v2500-a1-and-v2500-a5-series-turbofan-engines)
---
*AI Analytics · CC0 1.0*