# Airworthiness Directives; Cirrus Design Corporation Models SR20 and SR22 Airplanes
> **Rule** · Final rule. · Published 2006-10-13 · Effective 2006-11-17 · 71 FR 60414
## Document
- **Document number:** E6-16741
- **Category:** airworthiness
- **Manufacturer:** Cirrus Design Corporation Models SR20 and SR22
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 71 FR 60414
- **Publication date:** 2006-10-13
- **Effective date:** 2006-11-17
- **FAA docket:** Docket No. FAA-2006-24010
## Abstract

The FAA adopts a new airworthiness directive (AD) for certain Cirrus Design Corporation (CDC) Models SR20 and SR22 airplanes. This AD requires you to check the maintenance records to determine whether the brake caliper piston O-ring seals were replaced at the last annual or 100-hour inspection. If the O-rings were not replaced, this AD requires you to replace the O-ring seals with new seals or replace brake calipers. This AD also requires you to modify the main landing gear wheel fairings to add temperature indicator sticker inspection holes, trim the wheel fairings to prevent them from holding fluids, install temperature indicator stickers on the brake calipers, and insert Revision A6 (with revised preflight walk-around, a limitation on the engine speed used to taxi, and brake inspection/servicing intervals) into the Pilot's Operating Handbook (POH). This AD results from several reports of airplanes experiencing brake fires and two airplanes losing directional control. We are issuing this AD to detect, correct, and prevent overheating damage to the brake caliper piston O-ring seals, which could result in leakage of brake hydraulic fluid. Consequently, this could lead to the loss of braking with loss of airplane directional control or brake fire.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2006/10/13/E6-16741/airworthiness-directives-cirrus-design-corporation-models-sr20-and-sr22-airplanes)
---
*AI Analytics · CC0 1.0*