# Airworthiness Directives; Airbus Model A300 Airplanes
> **Rule** · Final rule. · Published 2006-12-07 · Effective 2007-01-11 · 71 FR 70865
## Document
- **Document number:** E6-20616
- **Category:** airworthiness
- **Manufacturer:** Airbus Model A300
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 71 FR 70865
- **Publication date:** 2006-12-07
- **Effective date:** 2007-01-11
- **FAA docket:** Docket No. FAA-2006-25423
## Abstract

The FAA is superseding an existing airworthiness directive (AD), which applies to all Airbus Model A300 airplanes. That AD currently requires repetitive inspections for cracking and corrosion in the lower rim area of the rear pressure bulkhead and adjacent areas, repetitive inspections for cracking or corrosion in the service apertures and the upper rim area of the rear pressure bulkhead, and corrective actions if necessary. This new AD removes certain repetitive inspections and reduces the repetitive interval of one inspection. This new AD also requires an inspection for missing or damaged sealant in the area between the outer attachment angle and circumferential joint doubler, and corrective action if necessary. This new AD also requires additional inspections for corrosion of certain areas and repetitive inspections for airplanes on which repairs have been done. This AD results from reports of corrosion and cracking in the various components associated with the rear pressure bulkhead. We are issuing this AD to prevent reduced structural capability of the fuselage and consequent decompression of the airplane.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2006/12/07/E6-20616/airworthiness-directives-airbus-model-a300-airplanes)
---
*AI Analytics · CC0 1.0*