# Airworthiness Directives; CTRM Aviation Sdn. Bhd. (Formerly Eagle Aircraft (Malaysia) Sdn. Bhd.) Model Eagle 150B Airplanes
> **Rule** · Final rule. · Published 2007-02-14 · Effective 2007-03-21 · 72 FR 6928
## Document
- **Document number:** E7-2319
- **Category:** airworthiness
- **Manufacturer:** CTRM Aviation Sdn. Bhd. (Formerly Eagle
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 72 FR 6928
- **Publication date:** 2007-02-14
- **Effective date:** 2007-03-21
- **FAA docket:** Docket No. FAA-2006-23786
## Abstract

The FAA is adopting a new airworthiness directive (AD) to supersede AD 2004-11-04, which applies to all CTRM Aviation Sdn. Bhd. (Formerly Eagle Aircraft (Malaysia) Sdn. Bhd.) Model Eagle 150B airplanes. AD 2004-11-04 currently requires you to inspect certain canard inboard flap hinge support brackets (initially before further flight and repetitively before the first flight of each day) and perform any necessary follow-up action. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Malaysia to require the installation of improved design inboard flap hinge brackets as terminating action for the repetitive inspections. Consequently, this AD retains the requirement that you inspect certain canard inboard flap hinge support brackets (initially before further flight and repetitively before the first flight of each day) and then requires that you replace the parts with new design inboard flap hinge brackets as terminating action for the repetitive inspections or if cracks are found. We are issuing this AD to detect and correct cracks in the canard inboard flap hinge support brackets, which could result in loss of retention of controls and consequently, loss of airplane control.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2007/02/14/E7-2319/airworthiness-directives-ctrm-aviation-sdn-bhd-formerly-eagle-aircraft-malaysia-sdn-bhd-model-eagle)
---
*AI Analytics · CC0 1.0*