# Airworthiness Directives; EXTRA Flugzeugproduktions-und Vertriebs-GmbH Models EA-300, EA-300S, EA-300L, and EA-300/200 Airplanes
> **Rule** · Final rule. · Published 2007-01-24 · Effective 2007-02-28 · 72 FR 3050
## Document
- **Document number:** E7-775
- **Category:** airworthiness
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 72 FR 3050
- **Publication date:** 2007-01-24
- **Effective date:** 2007-02-28
- **FAA docket:** Docket No. FAA-2006-26134
## Abstract

We are adopting a new airworthiness directive (AD) to supersede AD 2002-21-11, which applies to certain EXTRA Flugzeugbau GmbH (EXTRA) Model EA-300S airplanes. AD 2002-21-11 currently requires you to inspect, using a fluorescent dye check penetrant method, the upper longeron at the horizontal stabilizer attachment for cracks, repair any cracks found, and modify the horizontal stabilizer. That AD also requires a limit on operation to the Normal category until the initial inspection and modification on airplanes with less than 200 hours time-in-service is done. Since we issued AD 2002-21-11, cracks have been found on Models EA-300L and EA-300/200 airplanes. Consequently, this AD adds airplanes to the Applicability section and requires you to inspect and modify the upper longeron at the horizontal stabilizer attachment. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany. We are issuing this AD to detect, correct, and prevent cracks in the upper longeron at the horizontal stabilizer attachment, which could result in structural failure of the aft fuselage. This failure could lead to loss of control.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2007/01/24/E7-775/airworthiness-directives-extra-flugzeugproduktions-und-vertriebs-gmbh-models-ea-300-ea-300s-ea-300l)
---
*AI Analytics · CC0 1.0*