# Airworthiness Directives; Boeing Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
> **Rule** · Final rule; request for comments. · Published 2008-11-14 · Effective 2008-12-01 · 73 FR 67383
## Document
- **Document number:** E8-25893
- **Category:** airworthiness
- **Type:** Rule
- **Action:** Final rule; request for comments.
- **Citation:** 73 FR 67383
- **Publication date:** 2008-11-14
- **Effective date:** 2008-12-01
- **FAA docket:** Docket No. FAA-2008-1147
## Abstract

The FAA is revising an existing airworthiness directive (AD) that applies to certain Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. That AD currently requires various repetitive inspections for cracking of the upper frame to side frame splice of the fuselage, and other specified and corrective actions if necessary. That AD also provides for an optional preventive modification, which terminates the repetitive inspections. This new AD adds an optional terminating action that was inadvertently omitted from that AD. This AD results from a report that the upper frame of the fuselage was severed between stringers S-13L and S-14L at station 747, and the adjacent frame at station 767 had a 1.3-inch-long crack at the same stringer location. We are issuing this AD to detect and correct fatigue cracking of the upper frame to side frame splice of the fuselage, which could result in reduced structural integrity of the frame and adjacent lap joint. This reduced structural integrity can increase loading in the fuselage skin, which will accelerate skin crack growth and result in decompression of the airplane.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2008/11/14/E8-25893/airworthiness-directives-boeing-model-737-100--200--200c--300--400-and--500-series-airplanes)
---
*AI Analytics · CC0 1.0*