# Airworthiness Directives; Cessna Aircraft Company 172, 175, 180, 182, 185, 206, 207, 208, 210, and 303 Series Airplanes
> **Rule** · Final rule; request for comments. · Published 2008-05-02 · Effective 2008-05-12 · 73 FR 24168
## Document
- **Document number:** E8-9719
- **Category:** airworthiness
- **Manufacturer:** Cessna
- **Type:** Rule
- **Action:** Final rule; request for comments.
- **Citation:** 73 FR 24168
- **Publication date:** 2008-05-02
- **Effective date:** 2008-05-12
- **FAA docket:** Docket No. FAA-2008-0471
## Abstract

The FAA is adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) 172, 175, 180, 182, 185, 206, 207, 208, 210, and 303 series airplanes. This AD requires you to inspect the alternate static air source selector valve to assure that the part number identification placard does not obstruct the alternate static air source selector valve port. If the part number identification placard obstructs the port, this AD requires you to remove the placard, assure that the port is unobstructed, and report to the FAA if obstruction is found. This AD results from reports of improper installation of the part number identification placard on the alternate static air source selector valve. The actions specified by this AD are intended to prevent erroneous indications from the altimeter, airspeed, and vertical speed indicators, which could cause the pilot to react to incorrect flight information and possibly result in loss of control.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2008/05/02/E8-9719/airworthiness-directives-cessna-aircraft-company-172-175-180-182-185-206-207-208-210-and-303-series)
---
*AI Analytics · CC0 1.0*