# Airworthiness Directives; Hawker Beechcraft Corporation (Type Certificate Previously Held by Raytheon Aircraft Company) Models 1900, 1900C, and 1900D Airplanes
> **Rule** · Final rule. · Published 2009-11-09 · Effective 2009-12-14 · 74 FR 57567
## Document
- **Document number:** E9-26385
- **Category:** airworthiness
- **Manufacturer:** Hawker Beechcraft Corporation (Type Certificate Previously Held by Raytheon
- **Type:** Rule
- **Action:** Final rule.
- **Citation:** 74 FR 57567
- **Publication date:** 2009-11-09
- **Effective date:** 2009-12-14
- **FAA docket:** Docket No. FAA-2009-0165
## Abstract

We are adopting a new airworthiness directive (AD) to supersede AD 2006-24-11, which applies to certain Hawker Beechcraft Corporation (HBC) (Type Certificate previously held by Raytheon Aircraft Company) Models 1900, 1900C, and 1900D airplanes. AD 2006-24- 11 currently requires you to repetitively inspect the forward, vertical, and aft flanges of both the left and right wing rear spar lower caps for cracks, repair any cracks found, and report the inspection results to the manufacturer. Since we issued AD 2006-24-11, the manufacturer has developed a modification kit to install on the wing rear spar lower caps that will terminate the 200-hour repetitive inspection required in AD 2006-24-11. Consequently, this AD requires installing the new modification kits on the wing rear spar lower caps and terminates the repetitive inspections required in AD 2006-24-11 when the kits are installed. We are issuing this AD to prevent fatigue cracks in the wing rear spar lower caps, which could result in fatigue failure of the wing rear spar lower caps. A rear spar failure could result in complete wing failure and the wing separating from the airplane.

## Source
- [Federal Register document](https://www.federalregister.gov/documents/2009/11/09/E9-26385/airworthiness-directives-hawker-beechcraft-corporation-type-certificate-previously-held-by-raytheon)
---
*AI Analytics · CC0 1.0*