Energy Conservation Program: Test Procedure for Refrigerated Bottled or Canned Beverage Vending Machines

On August 11, 2014, the U.S. Department of Energy (DOE) issued a notice of proposed rulemaking (NOPR) to amend the test procedure for refrigerated bottled or canned beverage vending machines (beverage vending machines or BVMs). That proposed rulemaking serves as the basis for the final rule. In this final rule, DOE is reorganizing its test procedure for beverage vending machines into an Appendix A, which will be mandatory for equipment testing beginning 180 days after the final rule is published in the Federal Register, and an Appendix B, which will be mandatory for equipment testing to demonstrate compliance with any amended energy conservation standards arising out of DOE's ongoing BVM energy conservation standards rulemaking. Specifically, Appendix A includes amendments that update the referenced test method to ANSI/ ASHRAE Standard 32.1-2010, eliminate the requirement to test at the 90[emsp14][deg]F ambient test condition, establish a provision for testing at the lowest application product temperature, and adopt several amendments and clarifications to the DOE test procedure to improve the repeatability and remove ambiguity from the current BVM test procedure, as established by DOE in the 2006 BVM test procedure final rule. Appendix B contains all the amendments included in Appendix A and, in addition, incorporates provisions to account for the impact of low power modes on measured daily energy consumption (DEC). Finally, DOE is adopting in this final rule several clarifications regarding the certification and reporting requirements for beverage vending machines.