ABOUT TWO DAYS AGO THE POWER WINDOWS ON MY RODEO SUDDENLY STOPPED WORKING SO WE TOOK THE CONTROL OUT THINKING THAT MAYBE THE WIRES VIBRATED LOOSE OR SOMETHING LIKE THAT. WHEN WE REMOVED THE CONTROL THERE WAS NOTHING WRONG WITH THE CONTROL OR THE WIRING THAT WE COULD SEE BY JUST LOOKING AT IT SO WE OPENED THE FUSE BOX THAT IS UNDER THE DASH AND FOUND THE FUSE THAT CONTROLLED THE WINDOWS. THE POWER WINDOW FUSE IS A LARGE BOX LOOKING THING(NOT A REGULAR FUSE) WITH A RED BUTTON IN THE MIDDLE THAT WAS POPPED OUT SO WE PUSHED THE BUTTON BACK IN AND THE WINDOWS BEGAN WORKING AGAIN. AFTER USING THEM FOUR OR FIVE TIME JUST TO MAKE SURE THAT THEY WORKED WE TURNED OF THE IGNITION AND DIDN'T THINK ANYTHING OF IT. TODAY WHEN WE STARTED THE TRUCK EVERYTHING WAS FINE THEN AFTER LETTING IT RUN FOR 5-10 MINUTES I WENT TO GET INTO IT AND THE INSIDE WAS FULL OF SMOKE WE IMMEDIATELY TURN OFF THE TRUCK AND THEN I NOTICED SMOKE COMING FROM UNDER THE POWER WINDOW CONTROL ON THE DOOR WE REMOVED THE CONTROL AND THE WIRES WERE MELTED PRETTY BAD. WE THEN LOOKED IN THE FUSE BOX TO SEE IF THE FUSE HAD POPPED AGAIN AND DISCOVERED THAT THE FUSE HAD STARTED BURNING AND WAS MELTED INTO THE FUSE BOX. WE TRIED TO REMOVE THE FUSE AND BECAUSE IT WAS SO BADLY MELTED INTO THE FUSE BOX IT CRUMBLED WHEN WE TRIED TO REMOVE IT. WE HAVEN'T BEEN ABLE TO TAKE IT TO ANYONE TO FIND OUT WHAT HAPPENED BECAUSE IT IS SATURDAY AND THE DEALER ISN'T OPEN TODAY. *NM