ON MARCH 16, 2010, THE MAIN POWER WINDOW CONTROLS (LOCATED ON DRIVERS DOOR), BEGAN HAVING PROBLEMS. I COULD NO LONGER CLOSE THE FRONT RIGHT WINDOW FROM THIS CONTROL. I WAS ABLE TO OPEN THE FRONT RIGHT WINDOW AND WAS ABLE TO OPEN AND CLOSE THE THREE REMAINING POWER WINDOWS. THE POWER WINDOW SWITCH ON THE FRONT PASSENGER DOOR DID WORK (TO OPEN AND CLOSE THAT WINDOW). ON MARCH 23, 2010, I TURNED ON THE IGNITION FOR MY CRV AS I GOT READY TO GO TO WORK. I NOTICED AN INTENSE BURNING SMELL (OF PLASTIC) AND WAS ABLE TO TRACE IT TO THE DRIVER'S DOOR WITHIN SEVERAL MINUTES. I TURNED OFF MY VEHICLE AND TRIED TO EXAMINE THE DOOR FURTHER. SMOKE CAME OUT OF THE OPENINGS (LIKE THE SPEAKER COVER) OF THE DOOR PANEL. I NOTICED THAT THE CONTROL SWITCH FOR THE FRONT RIGHT WINDOW WAS NOW STICKING. I PULLED OUT THE POWER WINDOW FUSE FROM THE ENGINE FUSE BOX AND TOOK MY VEHICLE TO MY MECHANIC. UPON DISASSEMBLING THE FRONT DRIVER SIDE DOOR, THE MECHANIC WAS ABLE TO EXAMINE THE WIRING INSIDE THE DOOR AND ALL LOOKED NORMAL (NO SIGN OF BURNS). THEY TOOK OUT THE MAIN POWER WINDOW CONTROL SWITCH AND DISASSEMBLED THAT AND FOUND CLEAR BURN MARKS UNDERNEATH ONE SWITCH AND ON THE MOTHERBOARD ATTACHED TO IT. THEY WILL BE INSTALLING A BRAND NEW SWITCH TOMORROW THAT WAS ORDERED FROM HONDA. UNTIL THE SWITCH IS REPLACED, I DO NOT HAVE CONTROL OF THE POWER LOCKS FROM THE INSIDE, OPENING OR CLOSING THE WINDOWS, OR ADJUSTING THE REAR VIEW MIRRORS. I DO HAVE THE ORIGINAL SWITCH AVAILABLE FOR REVIEW OF THE DAMAGE. WHI