NHTSA Preliminary Evaluation PE16003

On May 23, 2016, Ford Motor Company (Ford) submitted a Defect Information Report (DIR) to NHTSA regarding a master cylinder defect that could result in loss of the front brake circuit in approximately 225,012 model year 2013 through 2014 Ford F-150 vehicles equipped with 3.5-liter GTDI engines and built at the Dearborn Truck Plant from August 1, 2013 through August 22, 2014; and the Kansas City Assembly Plant from August 1, 2013 through August 31, 2014 (NHTSA Recall #16V-345, Ford Recall #16S24).Ford indicated that the rearmost cup seal in the brake master cylinder may roll, resulting in leakage from the brake fluid reservoir to the brake booster.According to Ford's DIR, Depending on the amount of brake fluid loss from the brake master cylinder into the brake booster, the driver will experience an audible chime, message center alert, red brake warning light in the instrument cluster and may begin to experience a change in brake pedal travel and feel.In the event that a loss of brake fluid is substantial enough to reduce brake function to the front wheels, the driver may experience longer pedal travel, increased pedal effort, and extended stopping distance, increasing the risk of a crash.Full braking function would remain in the rear wheel brake circuit.Ford's recall will replace the master cylinder and, if the master cylinder is leaking, also replace the brake booster.Seventy-three (73) of the complaints received by ODI contained vehicle identification number (VIN) information required to determine date of build and recall applicability.ODI's analysis found that 66 complaints to ODI and 278 complaints to Ford involving vehicles built in the range covered by 16V-345, resulting in an overall complaint rate of 152.9 incidents per 100,000 vehicles.Twelve (12) crash incidents were reported, including 11 with VIN information.All 11 crash incidents with VIN information reported involve vehicles covered by Ford's recall.ODI's analysis identified 7 ODI complaints and 36 Ford