The Office of Defects Investigation (ODI) opened this Preliminary Evaluation (PE) based on seventy-four Vehicle Owner Questionnaires (VOQs) reporting headlight failures on model year (MY) 2011-2013 KIA Sorento vehicles.In its response to ODI's June 25, 2020, information request letter (portions of which were submitted under request for confidentiality), Kia Motor America (Kia) provided design details of the headlight system showing that each headlight circuit is independently powered by the Smart Junction Box (SJB), a power control module. Kia claimed that the design minimizes the chance of both headlights failing simultaneously due to a headlight connector defect, a component located downstream of the SJB. Kia also advised that the SJB contains a safety feature designed to monitor power consumption for each headlight circuit; if excessive current is being demanded by either headlight the SJB will open the circuit (i.e., stop supplying current). Lastly Kia presented testing showing that the maximum headlight connector temperature achieved prior to the SJB opening the circuit was below the autoignition temperature of the plastic material the connector housing is made of, which Kia maintains eliminates the potential for a fire originating from an electrically overheated headlight connector. In its review of all available data, ODI determined that the majority of both VOQ and Kia customer complaints (1,339 reports in total) involved the loss or dimming of a single low beam headlight assembly caused primarily by a poor or overheated connector terminal located at the headlight. In some cases the failures were momentary in nature (i.e., flickering) with the headlights coming back on without driver intervention. A minority of VOQs and Kia complaints (the 196 Other reports) alleged simultaneous (and persistent) loss of both low beam headlights, and in most cases the driver was able to take an action (e.g., toggle the headlight switch, or use the ON rather than the AUTO sett